DEWALT DCG405N XR Brushless Angle Grinder Review
The DeWalt DCG405N XR Angle Grinder boasts a high performance motor and battery with a range of features that improve performance as well as safety.
The DeWalt DCG405N XR it suitable for both DIY enthusiasts as well as professionals alike.
The brushless motor is an enhancing feature with this angle grinder. It means that the motor can operate with the friction that is normally caused by the brushes being present. As a result, the DCG405N has a high performance level and is efficient in terms of battery life in comparison to other models without this feature.
The 18-volt Li-ion battery works as a powerful combination with the brushless motor as this gives an added boost to both performance and power. These batteries also come equipped with a low self-discharge, which means that minimal power is required to discharge the battery itself. This helps to prolong the battery life, and in turn lead to greater performance from it.
As well as high performance in the DeWalt motor, the surroundings of the motor have been designed in a way that offers protection to them. This has been achieved with the inclusion of mesh covers around the motor. This means that there is a protective layer to prevent dust and other small particles from entering the motor during and after use. Consequently, this will protect the longevity and overall function of the motor, ensuring performance is maximised.
In addition to this, a Soft Start feature has been added to the DCG405N. This means that when turned on there is a gradual build-up of speed. As a result, this eliminates any kind of shudder when turning on the tool, to allow for a smoother operation for the user. This helps to make the tool comfortable to use, but also means that there is less risk of cutting further than needed when first turning on the angle grinder.
DEWALT DCG405N Angle Grinders : Editor’s Choice Best Buy
Benefits of DeWalt DCG405N XR Brushless Angle Grinder
The DeWalt DCG405N angle grinder has a number of designed features that have been added In order to enhance the usability experience. One of these is the two position side handle on this tool. This means that there are two different positions for the handle, accommodating for both left hand and right hand users. The handle also comes with a rubber grip, adding extra comfort and security for the user.
As well as this, the DeWalt grinder has been engineered to include an electronic clutch. This means that if the tool pinches or stalls when in use, the electronic clutch is activated, and this reduces the level of kickback for the user. In turn, this means that user is protected for these kinds of events, should they arise. This will give the user piece of mind and know that they can focus on the job at hand when using the tool, rather than having to worry about things like stalling happening.
In addition, the DCG405N is lightweight and boasts an ergonomic design that supports usability. This is because being lightweight means that user is able to operate it for longer without the onset of fatigue, and as a result, will be able to complete more work to a high standard.
- DWE490 Angle Grinder 230mm 2000W 240V
Key Features of DEWALT DCG405N
A range of key features help to make this grinder one of the most popular.
- Side handle that has two possible positions
- Rubber grip
- Mesh covers to protect the motor
- Reduced kickback due to electronic clutch
- 18-volt brushless motor
- Automatic stop function when trigger is released
- Overload protection
- Soft start
As with all power tools, safety is key and this angle grinder is no exception. It comes with a range of features that only add to the overall safe operation of the tool. One such feature is the Power-off function, which means that when the tool is overloaded it will automatically shut down in order to protect both the user and the tool itself.
As well as this there is an electric brake built into the tool. This means that if the user releases the trigger for any reason, then the wheel quickly stops, adding a further step of protection to the user and to the working environment around them.
Finally, the rubberised grip also contributes to the high safety standards of this angle grinder. It allows the user to operate the tool with confidence in their ability to grip and keep hold of it during use.
- Brand: DeWalt
- Model: DCG405N
- Power Tool: Angle Grinder
- Power Source: Cordless Battery
- Voltage: 18 volts 18V
- Battery Chemistry: Li-ion Lithium Ion
- Power Output: 800w
- Load Speed: 9,000 rpm
- Maximum Disc Diameter: 125 mm
- Spindle Thread: M14
- Length: 310 mm
- Weight: 1.74 kg
The information provided on this website (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the Site. Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use of the Site or reliance on any information provided on the Site. Your use of the Site and your reliance on any information on the Site is solely at your own risk. The information was believed to be correct at the time of publishing and was provided in good faith.
EXTERNAL LINKS DISCLAIMER FOR WEBSITE
The Site may contain links to other websites or content belonging to or originating from third parties or links to websites and features in banners or other advertising. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability or completeness by us. We do not warrant, endorse, guarantee, or assume responsibility for the accuracy or reliability of any information offered by third-party websites linked through the site or any website or feature linked in any banner or other advertising. We will not be a party to or in any way be responsible for monitoring any transaction between you and third-party providers of products or services.
AFFILIATES DISCLAIMER FOR WEBSITE
The Site may contain links to affiliate websites, and we receive a small affiliate commission for any purchases made by you on the affiliate website using such links. Our affiliates include Amazon and other leading retailers. We are a participant in the Amazon Services Associates Program, an affiliate advertising program designed to provide a means for us to earn advertising fees by linking to Amazon.co.uk and affiliated websites. Any monies received goes towards the upkeep of this website, web hosting costs and other expenses.
TESTIMONIALS DISCLAIMER FOR WEBSITE
The Site may contain testimonials by users of products and/or services. These testimonials reflect the real-life experiences and opinions of such users. However, the experiences are personal to those particular users, and may not necessarily be representative of all users of our products and/or services. We do not claim, and you should not assume, that all users will have the same experiences. Your individual results may vary. The testimonials on the Site are submitted in various forms such as text, audio and/or video, and are reviewed by us before being posted. They appear on the Site verbatim as given by the users, except for the correction of grammar or typing errors. Some testimonials may have been shortened for the sake of brevity where the full testimonial contained extraneous information not relevant to the general public.
The views and opinions contained in the testimonials belong solely to the individual user and do not reflect our views and opinions. [We are not affiliated with users who provide testimonials, and users are not paid or otherwise compensated for their testimonials.] The testimonials on the Site are not intended, nor should they be construed, as claims that our products and/or services can be used to diagnose, treat, mitigate, cure, prevent or otherwise be used for any disease or medical condition. No testimonials have been clinically proven or evaluated.
Best DEWALT Angle Grinders
|1||DEWALT DCG405FN-XJ DCG405FN Cordless XR Brushless Flathead Angle Grinder, 18 V, Yellow/Black, 125 mm||763 Reviews||£262.80 £155.90||Check Price|
|2||DEWALT DCG405N 18V XR Brushless 125mm Angle Grinder, Multi-Colour||3,190 Reviews||£117.95||Check Price|
|3||DeWalt DCG405N 18V Brushless 125mm Angle Grinder with TSTAK II Tool Box (Battery & Charger Not...||15 Reviews||£154.00||Check Price|
|4||Dewalt DCG412N 18V XR Li-ion Cordless Angle Grinder Bare Unit + Tstak Tool Box||£92.99||Check Price|
|5||DEWALT DCG412N 18V XR Cordless Angle Grinder 125mm with 2 x 5.0Ah Batteries||£222.55 £216.13||Check Price|